Jojeee
/
phase_measurement_board
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Added to the readme

This commit is contained in:
Jojeee 2022-08-24 09:53:14 +01:00
parent a4a1d7f61d
commit fed3a071c2
1 changed files with 4 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
README.md
View File

@ -7,10 +7,13 @@
* The phase of each input can be tuned until the output reaches a minimum/maximum output, this indicates 180/0 phase difference respectively
* Due to issues with dynamic range, the null points (180 degree destructive intfer.) are easier to measure
# Why did I make it?
# Why was it made?
* This board is to prove out a relatively novel way of phase matching a large number of HackRF SDRs, for use in phased antenna arrays
* The board will hopefully prove the technique's ability to work with 4 units and from there it can be scaled up ~40/50 element arrays (each element powered by a separate radio)
![3D render of the board](Phase_Measurement_Board.png)
# Critiques
* The aim was to get a switch that would allow signals with frequencies up to 6GHz to be used. In practice with the type of substrate used, the design is not likely to perform well
* The board was manufactured via JLCPCB and even it is made using a controlled FR4-like material, it likely is not performant enough at the higher frequencies. Consequently, if not being used at those higher frequencies, the switch chosen could have been cheaper and have been in a more accessible package.