diff --git a/README.md b/README.md
new file mode 100644
index 0000000..584321e
--- /dev/null
+++ b/README.md
@@ -0,0 +1,16 @@
+# What even is this?
+* It is a small board that will help measure the phase offset between a reference signal and 1/4 inputs.
+* A quick and dirty way of knowing if the two measured signals are in/out of phase was needed. The resistor combiner allows a device to measure either a null or max output power depending on the inputs' destructive/constructive interference.
+
+# What does this mean?
+* Absolute phase offsets are not easily obtainable using this method
+* The phase of each input can be tuned until the output reaches a minimum/maximum output, this indicates 180/0 phase difference respectively
+* Due to issues with dynamic range, the null points (180 degree destructive intfer.) are easier to measure
+
+# Why did I make it?
+* This board is to prove out a relatively novel way of phase matching a large number of HackRF SDRs, for use in phased antenna arrays
+* The board will hopefully prove the technique's ability to work with 4 units and from there it can be scaled up ~40/50 element arrays (each element powered by a separate radio)
+
+
+
+